Maxprep™ Liquid Handler Operating Manual
Literature # TM509
The Maxprep™ Liquid Handler provides automated methods for preprocessing of samples prior to nucleic acid purification on the Maxwell® RSC and Maxwell® RSC 48 Instruments for a range of research sample types. In addition, the Maxprep™ Liquid Handler provides a variety of post-processing automated methods for handling and analysis of eluted nucleic acids. The Maxprep™ Liquid Handler is designed for use by laboratory professionals. Up to 48 samples can be prepared in a single preprocessing run.
The Maxprep™ Liquid Handler is exclusively designed to be used with Maxwell® RSC reagent kits to perform automated preprocessing of samples prior to isolation of nucleic acids with the Maxwell® RSC and Maxwell® RSC 48 Instruments. A variety of post-processing methods are available with the Maxprep™ Liquid Handler that are compatible with reagents from a variety of vendors.
Summary of Changes
The following change was made to the 2/20 revision of this document:
Updates were made to Section 9.2.
The Maxprep™ Liquid Handler is for research use only.
Printed in USA. Revised 2/20.