Data generated using the Plexor^® qPCR and qRT-PCR Systems on any supported real-time instrument can be analyzed with one dedicated software program, the Plexor^® Analysis Software. This software can compare the decreasing fluorescent signal of a Plexor^® System reaction to a standard curve to calculate the cycle threshold and concentration of unknown samples. The software also generates a thermal melt curve to calculate the melt temperature (T_m) of the amplified product and reveal the amplification of any undesired products. The Plexor^® Analysis Software includes five report options, which allow you to save or print sample details (e.g., sample ID, dye label, cycle threshold, T_m and concentration, if applicable, and whether the sample has the expected T_m), threshold values, baseline regions and run information.

Download the Plexor^® Analysis Software.
(You will be required to register to access and download the software on the secure Plexor^® Primer Design Web site.)

The Plexor Systems are compatible with a variety of real-time PCR instruments. Technical manuals are available describing how to use the Plexor Systems on each  supported instrument. These manuals also contain comprehensive information on data analysis. Use the links below to navigate to the instruction manual for use of the Plexor System  on your chosen instrument.

ABI PRISM 7000 sequence detection system ABI PRISM 7700 sequence detection system Applied Biosystems 7900HT System Applied Biosystems 7300 and 7500 Systems Roche LightCycler 1.0 Roche LightCycler 2.0 Bio-Rad iCycler Thermal Cycler MJ Research DNA Engine Opticon 2 Cepheid SmartCycler Stratagene Mx3000P, Mx3005P and Mx4000

The Plexor™ technology is licensed from EraGen Biosciences.